Micro Pod and K-Pod Firmware Updates

We highly recommend that you update to the newest version of firmware so you are able to benefit from the newest, up-to-date features that the Micro Pod Lite or Sport and K-Pod has to offer. Below is the newest version of the Micro Pod Lite, Sport, and K-Pod firmware. Please review the instructions on how to successfully update your unit. The instructions will tell you how to find out what version your Micro Pod Lite, Sport, or K-Pod is running so you can see if you need to update. The instructions also show you how to set your unit back to factory default settings using a factory default configuration file. The Micro Pod Lite and Micro Pod Sport have different firmware so make sure you download the correct files for your unit. The Micro Pod Lite and K Pod Sport use the same firmware.

Version 2.0
- Added Ability To Connect To All Sony/Canon Cameras With A Remote Jack Integrated Into AV Remote Terminal
- Added Ability To Connect To GoPro Cameras (HERO HD 1080 With HERO Bus Port)
- Added Ability To Connect To New 20 Hz GPS From RLC Racing
- Added Ability To Save Start/Finish And Load At Later Date
- Added Summary Screen
- Added WiFi Racing
- Added High Logging Rates On DACX Analog Channels (200, 500, and 1000 Hz)

Instructions: How To Update The Micro Pod Lite or Sport (PDF)
Micro Pod Lite and K-Pod Version 2.0 (20 MB file) (Posted 01/25/12)
Micro Pod Lite and K-Pod Factory Default Configuration File (Posted 11/16/11)
Micro Pod Sport Version 2.0 (20 MB file) (Posted 01/25/12)
Micro Pod Sport Factory Default Configuration File (Posted 11/16/11)

Note: If after you update your unit and load your backup file you find that the G in the GLC indicator field never illuminates it's because the GPS did not get added. The GPS was renamed in the newer firmware so you will need to go into the Peripherals screen and add the GPS manually. After you add the GPS save your car file and create another backup so you don't have to do this in the future. You should notice that after you add the GPS in the Peripherals screen the G in the GLC indicator field will start to blink green and will soon stay green once it has locked onto satellites.

Micro Pod and Track Commander BIOS Update
This only applies to customers that bought their unit before May 6, 2009. If you purchased either a Track Commander or Micro Pod unit before May 6, 2009 then you will want to update the BIOS so that you have the most up to date one available. The new BIOS reduces the amount of time the Track Commander or Micro Pod unit takes to boot up. An easy way to know if you have the newest BIOS is power the unit on. If a splash screen appears right away you have the newest BIOS but if the splash screen does not appear for 5 or 10 seconds then you have the older BIOS and you need to update. Below is the newest version of the Micro Pod and Track Commander BIOS. Please review the instructions on how to successfully update your unit. The instructions will show you how to update your unit and set it back to pre-configured conditions.
Instructions: How To Update The BIOS
New Micro Pod and Track Commander BIOS