Pro Unit Firmware Updates

We highly recommend that you update to the newest version of firmware so you are able to benefit from the newest, up-to-date features that the Pro S or X has to offer. Below is the newest version of the Pro S and X firmware. Please review the instructions on how to successfully update your unit. The instructions will tell you how to find out what version your Pro S or X is running so you can see if you need to update. The instructions also show you how to set your unit back to factory default settings using a factory default configuration file. The Pro S and X have different firmware so make sure you download the correct files for your unit.

Version 2.0
- Added Ability To Connect To All Sony/Canon Cameras With A Remote Jack Integrated Into AV Remote Terminal
- Added Ability To Connect To GoPro Cameras (HERO HD 1080 With HERO Bus Port)
- Added Ability To Connect To New 20 Hz GPS From RLC Racing
- Added Ability To Save Start/Finish And Load At Later Date
- Added Summary Screen
- Added WiFi Racing
- Added High Logging Rates On DACX Analog Channels (200, 500, and 1000 Hz)

Instructions: How To Update The Pro Unit (PDF)
Pro X Version 2.0 (20 MB file) (Posted 01/25/12)
Pro X Factory Default Configuration File (Posted 11/16/11)
Pro S Version 2.0 (20 MB file) (Posted 01/25/12)
Pro S Factory Default Configuration File (Posted 11/16/11)

Note: If after you update your unit and load your backup file you find that the G in the GLC indicator field never illuminates it's because the GPS did not get added. The GPS was renamed in the newer firmware so you will need to go into the Peripherals screen and add the GPS manually. After you add the GPS save your car file and create another backup so you don't have to do this in the future. You should notice that after you add the GPS in the Peripherals screen the G in the GLC indicator field will start to blink green and will soon stay green once it has locked onto satellites.