Processor / CPU:

520 Mhz Intel 32 Bit XScale RISC Processor 

Color Graphics Touch Screen Display:

3.5 in. Sunlight Readable, Transflective TFT Color Graphics Display (Micro Pod)
320x240, 64,000 Colors (Micro Pod)
7.0 in. Sunlight Readable, Transflective TFT Color Graphics Display (Pro Unit)
800x480, 64,000 Colors (Pro Unit)
Dimmable For Nighttime Use
Touch Screen For Ease Of Use
Wide Viewing Angle

Shift Lights:

Eight (8) Dual Color Red/Green Shift Lights (Micro Pod)
Sixteen (16) Dual Color Red/Green Shift Lights (Pro Unit)
Sunlight Readable, Extremely Bright
Dimmable For Nighttime Use
User Programmable Limits And Scale

Firmware And Functionality:

Multiple Screens Display Tach & Engine Vitals
With User Programmable Limits And Alarms
Pop-Up Lap Timer With Best/Last Lap Displays
Calibration/Sensor And User Preference Screens
On-Unit Replay Screen Of Any Logged Track Session
File Management Supports Multiple Track Sessions
Display Any Sensor(s) On User Configured Screens
Flexible On-Screen User Configurable Data Logging
Easy To Update/Upgrade Software In The Field
Complete With Easy To Use Back-Up Utility

Data Logging:

   The Micro Pod and Pro units come with two (2) Gigabytes of standard on-board nonvolatile FLASH memory to store dozens and dozens of tracks sessions. That could be an entire racing season logged on your Micro Pod or Pro unit without writing over any existing file! All engine vitals as well as all other inputs can be logged. Each input channel can be logged at any of the selectable sample rates. The Micro Pod and Pro units automatically over samples by four times and averages the data to get extremely accurate results. This feature guarantees you data that is more accurate than any other system on the market. The CAN data as well as the GPS data is logged.
Two (2) Gigabytes Standard Data Storage Memory (Factory Expandable)
Data 4x Over Sampled And Averaged For Accuracy
Data Sampled Up To 400 Hz Per Channel
Data Logged Up To 100 Hz Per Channel
Programmable Auto Start/Stop Logging Features
Data From CAN Bus Logged
Data From GPS Serial Port Logged
Data From Synchronized Video Serial Port Logged
Stores Dozens Of Track Sessions With Out the Need To Up Load Data
Auto Time Stamp Of Each Logged Track Session
Upload To PC Via USB Client 1 Mega Bits Per Second
Upload To USB Host FLASH Drive 10 Mega Bits Per Second

Environmental Limits:

Operating Temperature Ambient/Outside -20 to +70 C (-4 to +158 F)
Operating Voltage 7 To 18 V

Analog Inputs (Logged):

Eight (8) Total Analog Inputs (4 Internal)
High Accuracy 10-Bit High Speed Analog To Digital Converters (A to D)
Four (4) External Single Ended A To D Channels (Micro Pod Lite and Pro X Only)
One (1) Internal Single Ended Channels Dedicated For Monitoring Battery Volatage
Data From Onboard 3-Axis G-Force Sensor Logged (10Hz for each channel, Range: +-6G, Resolution: 12-bit)
Additional Channels Can Be Added By Adding One or More DACX
The Micro Pod Lite and Pro X comes with four (4) external analog inputs. The Micro Pod Sport and Pro S does not come with any external analog inputs. The Micro Pod Sport and Pro S needs to be ordered with the data acquistion channel expander (DACX) module option in order to have external analog inputs.

Digital Inputs (Logged):

Two (2) Isolated Digital Interrupt Inputs Used For RPM, Wheel Speed, Etc. (Micro Pod Lite and Pro X Only)
Additional Channels Can Be Added By Adding One or More DACX
Pulses on all inputs can be processed as low as 0-5 V and as high 0-18 V. The Micro Pod Lite and Pro X comes with two (2) external digital inputs. The Micro Pod Sport and Pro S does not come with any external digital inputs. The Micro Pod Sport and Pro S needs to be ordered with the data acquistion channel expander (DACX) module option in order to have external digital inputs.

Digital Outputs:

Two (2) Digital Outputs
Additional Channels Can Be Added By Adding One or More DACX
User Programmable. Connect a relay to the digital output to trigger fans, alarms, or external LED lights. The Micro Pod Lite and Pro X comes with two (2) external digital outputs. The Micro Pod Sport and Pro S does not come with any external digital ouputs. The Micro Pod Sport and Pro S needs to be ordered with the data acquistion channel expander (DACX) module option in order to have external digital outputs.

Data Acquisition Expansion:

CAN Bus For Adding External Sensors
Add Analog And Digital Channels Or OBD-II Connectivity To Your Micro Pod Or Pro Unit With Any Data Acquisition Channel Expander (DACX) Module.  
Data 16x Over Sampled And Averaged For Accuracy
Data Sampled Up To 16,000 Hz Per Channel
Data Logged Up To 1000 Hz Per Channel

Connectivity:

   Downloading the data from the Micro Pod or Pro unit onto a PC is fast! You can use a USB FLASH memory stick with a transfer rate of 2.4 Mb/sec, that's 2.5x faster than our competitors. The serial ports can be used for connecting to GPS systems and synchronized video. The CAN bus can be used to interface most popular ECUs and can operate up to 1 Mb/sec.
USB Host For FLASH Stick / Drive, Keyboard and/or Mouse
CAN Bus ECU Interface (Logged)
Two (2) Serial Ports (RS-232) For GPS And Synchronized Video (Logged)
  
Mechanical:

Solid Billet Aluminum Housing
Hard Anodized For Rugged Good Looks and Durability
Available in Black, Red, and Blue
Simple Mounting Hardware provided
28-Pin Rugged Industry Standard Amp Connector (Micro Pod Lite and Pro X)
Sealed And Water Resistant