PC Analysis Software New, Updated PC Software Available Now!
The R.L.C. race analyzer software requires your PC to be running Windows XP with service pack 2 or Windows Vista, 2 GHz processor, 1 GB RAM, 100 MB hard drive space, and a screen resolution of at least 1280 x 800.

Version 2.32 Changes
- DACX Support
- Metric Units Now Supported
R.L.C. Race Analyzer Software (Ver 2.5) (40 MB file)
PC Software User Manual (Ver 1.0)

Chase Commander Firmware Updates
We highly recommend that you update to the newest version of firmware so you are able to benefit from the newest, up-to-date features that the Chase Commander has to offer. Below is the newest version of the Chase Commander firmware. Please review the instructions on how to successfully update your unit. The instructions will also tell you how to find out what version your Chase Commander is running so you can see if you need to update.

If you have a Track Commander you can update your unit with the Chase Commander firmware to get the latest features available.

Version 2.0 Changes
- Added Feature To Set Number of Beacons for Predictive Lap Timing (1-99 Beacons)
- Added Performance/Drag Mode
- Added Ability To Start Logging/Timing Off G-Forces (Autocross and Performance Mode)
- Improved Split Lap Timing Feature
- Added Ability To Tare (Level) G-Forces
- Added Directional Feature for all GPS Beacons/Start/Finish Line (Trigger Only One Way)
- Added Recovery Firmware To Help Prevent Corrupt Log Files If Power Is Removed Before Logging Stops
Instructions: How To Update The Chase Commander (PDF)
Chase Commander Version 2.0 (20 MB file)

Track Commander Firmware Updates
We highly recommend that you update to the newest version of firmware so you are able to benefit from the newest, up-to-date features that the Track Commander has to offer. Below is the newest version of the Track Commander firmware. Please review the instructions on how to successfully update your unit. The instructions will also tell you how to find out what version your Track Commander is running so you can see if you need to update.

Version 1.42 Changes
- Added Autocross (Seperate Start/Finish) Mode
- Added Another Font
- Added Access To Backup Log Files
Instructions: How To Update The Track Commander (PDF)
Track Commander Version 1.42 (20 MB file)

Micro Pod and K-Pod Firmware Updates
We highly recommend that you update to the newest version of firmware so you are able to benefit from the newest, up-to-date features that the Micro Pod and K-Pod has to offer. Below is the newest version of the Micro Pod and K-Pod firmware. Please review the instructions on how to successfully update your unit. The instructions will tell you how to find out what version your Micro Pod or K-Pod is running so you can see if you need to update. The instructions also show you how to set your unit back to factory default settings using a factory default configuration file. The Micro Pod Lite and Micro Pod Sport have different firmware and factory default configuratoin files so make sure you download the correct files for your unit.

Version 1.7
- Added DACX module support. You can now add any DACX to your unit.
- Changed lap timing screens. Screens now feature larger buttons for the user to push.
- Added ability to add your own OBD-II sensors. Only valid if you are connecting to the OBD-II port with an OBD-II CAN cable or DACX-221-OBD-II.

Instructions: How To Update The Micro Pod Lite or Sport (PDF)
Micro Pod Lite Version 1.71 (15 MB file)
Factory Default Configuration File v1.71  (Micro Pod Lite)
Micro Pod Sport Version 1.71 (15 MB file)
Factory Default Configuration File v1.71  (Micro Pod Sport)
K-Pod Version 1.71 (15 MB file)
Factory Default Configuration File v1.71  (K-Pod)

Micro Pod and Track Commander BIOS Update
Below is the newest version of the Micro Pod and Track Commander BIOS. Please review the instructions on how to successfully update your unit. Updating to this new BIOS will let your unit boot in about half the time it does now.  You do not have to do this if you are happy with the way the unit boots now or if you purchased a unit after May 6, 2009(Already has new BIOS loaded). The instructions will show you how to update your unit and set it back to pre-configured conditions.
Instructions: How To Update The BIOS
New Micro Pod and Track Commander BIOS

Synchonized Video
If you are using synchronized video and have Windows Vista installed on your computer you need to install a codec so your player will work correctly. To install the codec click Option, click Player, and check the 'Download Codecs Automatically' button. If you have Windows XP then you need to download and install this driver in order to view the Chase Cam video. This zip file has a readme file that gives you instructions on how to install this program.
Video Driver