The Track Commander has been re-designed as the Chase Commander. RLC Racing has worked exclusively with ChaseCam to ensure seamless integration between the data logger and the camera. The Chase Commander is the only lap timer, performance tool, or drifting instrument to use color graphics to display vital information to the driver and a touch screen for easy navigation. The Chase Commander has the same GPS lap/predictive timing and GPS track mapping functionality of the Track Commander but it also has some new features. The Chase Commander now features a performance and drag mode that will measure your car's horsepower, 1/4 and 1/8 mile times, maximum G's, acceleration and deceleration. It also features a drifting mode that will measure your car's drift angle, entry speed, maximum G's, and time. The drifting mode uses our dual GPS system and can also show you the lap line of the front of the car vs the lap line of the rear of the car to see if you are understeering or oversteering through a turn. Any one of the data acquisition channel expander (DACX) modules can be added to the Chase Commander to instantly add analog and digital channels and/or OBD-II connectivity.

Standard Features

Even the most expensive pro systems can not offer the flexibility and features the Chase Commander offers. All of this is at club level prices.

Sunlight Readable, Color Graphics Touch Screen Display
2 Gigabytes Logging Memory, PC Compatible File System With Venue/Time/Date
Transfer Session Files On the Race Logger To the PC With a USB Flash Stick
Large Pop-Up Graphic Lap, Split and Predictive Lap Timing Using 5 or 10 Hz GPS
Exact Line Track Mapping And GPS Lap Mapping (Only From R.L.C.)
3-Axis Internal G-Force Sensor
Serial Ports For GPS, Dual GPS, and Synchronized Video Options
CAN Bus For Adding Data Acquisition Channel Expanders (DACX)

Ever wonder what your car would run in the quarter mile? What its horsepower is? Switch the Chase Commander over to the performace mode, and it will instantly measure your car's performance. The performance firmware is included on all Chase Commanders as a standard feature.
The performance mode on the Chase Commander can also be used for Drag Racing applications. Timing is done through a combination of GPS and G-Force sensors so there is no need to set a start/finish and no waiting for your time after your run is over.

Horsepower
Acceleration (0-60 or 0-100 mph)
Deceleration (60-0 or 100-0 mph)
1/4 Mile Timer
1/8 Mile Timer
Maximum G's

Mounting Options

The Chase Commander is a very versatile unit and is able to be mounted in a variety of different ways. By not having a conventional wiring harness the Chase Commander can be mounted to the windshield with a suction cup mount, a steering wheel, handle bars, or to a dash. Below is a slide show of the different mounting options.

   The Chase Commander's plug-n-play cable harness is small and simple. It easily mounts on your windshield or any where else you want and plugs into the cigarette lighter for power.
   The plug-n-play cable harness also consists of all the connectivity that you need to download your sessions to a USB flash stick and connect to the GPS and video camera. The connectors are industry standard so there are no special cables needed to connect to the Chase Commander.